https://doi.org/10.1140/epjti/s40485-022-00076-z
Research Article
In situ erosion measurement tools for electric propulsion thrusters: triangular laser head and telemicroscope
1
Tools Unit, Leibniz Institute of Surface Engineering (IOM), Leipzig, Germany
2
ArianeGroup GmbH, Lampoldshausen, Germany
3
Design Department, JSC Engineering Design Bureau Fakel, Kaliningrad, Russia
4
Aerospazio s.r.l., Rapolano Terme, Italy
a
carsten.bundesmann@iom-leipzig.de
Received:
3
November
2021
Accepted:
13
January
2022
Published online:
8
February
2022
The lifetime of electric propulsion (EP) thrusters depends particularly on the erosion characteristics of operation relevant components, for instance, the grid hole erosion of gridded ion thrusters or the channel wall erosion of Hall effect thrusters. Here two tools for in situ erosion measurements are presented, a triangular laser head for surface profiling and a telemicroscope for high-resolution optical imaging. Both can give access to radial and axial erosion parameters. The measurements can be done in situ without the need for breaking the vacuum and dismounting the thruster, which reduces thruster testing time considerably. In situ measurements can also help to ensure reproducibility of thruster performance conditions and can improve statistics of thruster characterization. The present work describes the fundamentals of both techniques in detail, selected experimental setups are presented, their performance is characterized and critically evaluated. The capabilities and limitations related to erosion measurements of EP thrusters are, exemplary, demonstrated for a gridded ion thruster RIT-22 and a Hall effect thruster SPT-100D.
Key words: Electric propulsion / Gridded ion thruster / Hall effect thruster / Erosion measurements / Telemicroscope / Triangular laser head
© The Author(s) 2022
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
