https://doi.org/10.1140/epjti/s40485-022-00082-1
Research Article
Experimental evaluation of heat transfer effect on turbocompressor performance operating with helium-neon gas mixtures
Institute of Turbomachinery and Machinery Laboratory, University of Stuttgart, Stuttgart, Germany
a
maxime.podeur@itsm.uni-stuttgart.de
Received:
29
March
2022
Accepted:
9
June
2022
Published online:
21
June
2022
Within the framework of the Future Circular Collider (FCC) currently being investigated at CERN, the entire cryogenic cycle had to be revised with respect to the existing Large Hadron Collider (LHC). In particular, a novel pre-cooling cycle had to be developed for this purpose. This led to a closed-loop cryogenic cycle operating with a mixture of helium and neon, also called Nelium. To better understand the challenges and opportunities associated with the design and operation of radial compressors with such light gases, a closed loop test facility has been designed, built and commissioned at the ITSM (University of Stuttgart). The test facility has been developed to operate with air as well as with helium-neon gas mixtures of varying mixing ratios ranging from pure neon to pure helium. In this paper, the test facility architecture and operation procedure are briefly introduced together with a description of the newly installed compressor stage. Experimental performance measurements are then compared to adiabatic and diabatic numerical simulation validating respectively the pressure rise and diabatic stage efficiency for various gases. The heat transfer effect on compressor stage performance is then described and the respective contribution of the influencing factors are quantified.
Key words: Turbocompressor / Light gases / Diabatic compression
© The Author(s) 2022
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.